#Dsc alarm panel orange triangle code#

РІР‚вЂњ Check the sensors if it still does not turn off. РІР‚вЂњ Press the buttons РІР‚Сљ*72РІР‚Сњ if the alarm does not reset after pressing the RESET button. РІР‚вЂњ Press and hold the РІР‚СљRESETРІР‚Сњ key for 2 seconds. Replace the battery in the contact and the condition will clear. The indicated zone is reading a low battery condition and needs a replacement battery. Press the РІР‚В7РІР‚в„ў key and you will receive a number corresponding to the affected zone. How do I reset the yellow triangle on my DSC alarm? The zones will light up indicating what troubles are present on the system. To silence the trouble beep simply press the # key on the keypad. When a trouble is present the system trouble indicator light will illuminate and the keypad will beep every 10 seconds. How do I turn off the trouble light on my DSC alarm? РІР‚вЂњ A РІР‚СљBРІР‚Сњ should appear next to the zone when the system is bypassed. РІР‚вЂњ Press the * Key on the appropriate zone. РІР‚вЂњ Use the > key to scroll to the zone you wish to bypass. РІР‚вЂњ The System Must be disarmed prior to proceeding. This could be caused by a number of different possible factors, such as a low battery, an activated tamper or communication problems.

The yellow triangle means that your alarm system is experiencing a trouble condition. Subsequently, question is, What does the trouble light mean on ADT alarm? A trouble signal (sometimes indicated in the alarm history by the abbreviation TR) indicates a possible problem or difficulty with your security system, such as a loose wire, a poorly aligned sensor or a low battery status.Р”Р„lso, What does the yellow triangle mean on my alarm system? If a sensor fails to reset, it may still be detecting an alarm condition. To reset detectors, press and hold the RESET key () for 2 seconds. Certain sensors (such as smoke detectors and glass break detectors) have to be reset after an alarm.

#Dsc alarm panel orange triangle code#

To reset the alarm or the warning lights, enter your master code twice, press the reset button, and then enter РІР‚Сљ*72РІР‚Сњ if the alarm is still ringing.Р”Р„lso to know is, How do I clear the memory on my DSC keypad? To clear the memory, arm and disarm the system.

Thereof, How do you clear the trouble light on a DSC alarm?Р”ВSC alarms can go off for a number of reasons. To find out what the problem is, you can simply press *2 on your keypad. A trouble light could mean 1 of 8 problems. A yellow triangle on your DSC ADT Alarm system is also known as a РІР‚Сљtrouble light.РІР‚Сњ That means if you see this symbol, your system has an issue that you need to resolve.